General
ADL100-EYRF single phase pre-paid meters with intro-control are used for calculating the single active energy respectively on the frequency of 50/60 Hz. The meter has functions of RF card recharge,cooperate with circuit breaker to realize load cut-off and RS485 communication etc. meet the related technical requirements of electronic power meter in the IEC62053-21, IEC62053-22 standards.
Functions
|
Accuracy: kWh Class 1
Frequency 50/60HZ(Optional), Range: 45~65HZ
Auxiliary power supply(self supply): 220Vac(L-N), range:154~264V AC
Pulse output: Pulse output kWh
Consumption: <4VA(Each phase) |
Installation: DIN 35mm
Dimension(L*W*H): 72*88*70mm
Active pulse: Constant: 6400imp/kWh,400imp/kWh
Clock:M ≤0.5s/d
Starting current: 0.04A
|  |
Technical parameters
Technical parameters | ADL100-EY | ADL300-EY |
Voltage | Nominal voltage | 220V | 3*220/380V |
Nominal frequency | 50/60Hz |
Consumption | ＜4VA(Each phase) |
Current | Maximum current | 60A | 6A,80A |
Starting current | Connect directly:0.04A,connect via CT:0.002A |
Consumption | ＜4VA(Maximum current) |
Measurement
performance | Accuracy | Class 1 | Class 0.5s |
Clock | Accuracy | Error ≤0.5 |
Active pulse | Width | 80ms±20ms |
Constant | 1600imp/kWh | 6400imp/kWh |
Communication | Interface | RS485 |
Protocol | MODBUS-RTU |
Temperature range | Operating | -25℃ ～55℃ |
Storage | -40℃ ～70℃ |
Humidity | ≤95%（No condensation） |
Altitude | ≤2000m |
LCD Display
Operation Instruction
|
① Brand/Model ② Panel ③ Infrared Interface ④ Pulse Output light ⑤ Switch opening light ⑥ Button |
Wiring
Network
FAQ
Q：Difference between prepayment meter and measuring meter.
A：Measuring meter focuses on diversified power data measurement, power parameter measurement and analysis, power quality measurement, etc; the prepayment table focuses on billing, alarm, control tripping, etc.
Q：Why is this generation divided into card and internal control meter？
A：The internal control meter supports remote recharge, reduces manpower, maintenance cost and improves user experience.
Q：The reason to use wireless prepayment.
A：Market development needs. Point dispersion,It is difficult to arrange the middle layer equipment or the layout cost is very high.
Package
MINIMUM PACKAGE
| 
| 
| 
| 
|
MINIMUM PACKAGE
| Package dimensions(2 PC) 170*150*130mm
| Net Weight(0.257KG/PC*2) 0.514KG
|
WHOLE BOX PACKAGE
| Package dimensions(36 PCS) 540*480*280mm
| Package Weight(36 PCS) 10.712KG
|
PRODUCT HS CODE
| 8543709990
|
ATTENTION ! The above packing and weight data are only refer to model ADL100-EYRF. For other models or optional functions, please contact the salesman for details, thank you for your cooperation! |
.png)
.png)
EN
