江苏安科瑞电器制造有限公司

Solutions

Smart Lighting Control System

1 System Introduction

Based on KNX bus technology, Acrel-BUS smart lighting control system originates from Europe and develops from the three bus control technologies for residences and buildings including EIB, Batibus and EHS, of which EIB (European Installation Bus) is the agent technology. It uses the dual-core shielded twisted pair as the bus cable to connect all control modules for system control.
The system can integrate various independent control functions  and combine many advantages including comfort, flexibility, safety, energy conservation, economy, easy maintenance into one system. It is mainly used for the control areas of large pubic construction projects including residences and buildings.
 
2 System Functions
 
Manual control:smart panels and touchscreens installed in all areas can realize realtime control of light on/off and brightness according to actual needs.
Auto control: sensors of different functions (e.g. illuminance transducers and human motion sensors) can realize automatic control of light based on external environment.
Scenario controldifferent scenarios can be preset for switching between them.
Time controlthe system will automatically complete the light control according to the preset operation time to ensure minimum energy consumption in idle period.
Central controlfor all controls, realtime monitoring and effective control of the entire lighting area
can be realized. It facilitates the control modes and saves labor and power.
Status feedback: the system can give feedbacks on the on/off function of lighting fixtures on the site.
System linkagethe lighting system can form system linkage with the property management system,
the building automation system and the security &fire system.
 
 
3 Common Product Models
1) Power module

Product model
Module width
Output current
Installation method
ASL100-P640/30
6
640mA
Standard guide rail installation

Function description:
 
A standard power supply for the KNX/EIB system, coupling bus signals and monitoring currents in KNX/EIB systems. Besides, the power supply of this series provides an auxiliary DC voltage of 30V for the power supply of other peripheral equipment (e.g. touchscreens, IP gateways). The module can supply power to a maximum of 64 pieces of equipment with bus reset, overcurrent indication and short circuit protection.
 
 
2) Switch drive

Product model
Number of circuits
Module width
Rated capacity of a single circuit
Installation method
ASL100-S4/16
4
4
16A
Standard guide rail installation
ASL100-S8/16
8
8
16A
Standard guide rail installation
ASL100-S12/16
12
12
16A
Standard guide rail installation

Function description:
The switch drive is a drive used for switch control of equipment. It supports KNX bus protocol and has functions including logic, delay, preset, scenario and threshold switching.
 
3) 0-10V dimming drive

Product model
Number of circuits
Module width
Rated capacity of a single circuit
Installation method
ASL100-SD2/16
2
4
16A
Standard guide rail installation
ASL100-SD4/16
4
8
16A
Standard guide rail installation

Function description:
The 0-10V dimming module supports KNX bus protocol and is used to control dimming circuits. It has soft
on/off functions. Each circuit can be called by 8 scenarios simultaneously to check circuit status. It is
especially suitable for the dimming of incandescent lamps, LED lights and low voltage halogen lamps. It
also has functions including on/off, scenario and status feedback.
 
 
4) SCR dimming module

Product model
Module width
Current load
Installation method
ASL100-TD2/5
4
Max 5A
Standard guide rail installation

Function description:
The SCR dimming module supports KNX bus protocol.  As a dimming module, it cannot only control the connection and disconnection of the load through direct control of the connection and disconnection of input power, but also adjust input voltage by phase control to realize LED dimming.
 
5) Human motion and illuminance sensor

Product name
Channel
Function
Installation method
ASL100-T2/BM
2
Illuminance and human motion sensing, logic function
Embedded installation
ASL100-T2/BR
2
Illuminance and microwave sensing, logic function
Embedded installation

Function description:
 
The smart lighting sensor supports KNX bus protocol. It can sense external signals and physical conditions (such as light, infrared and microwave) and tranmit the sensed information to other KNX modules (such as dimmers, switch drives) to realize its functions. It is mainly used for places in need of automatic control in the smart lighting control system including public passages, lobbies and garages.
 
6) Smart panel

Product model
Switch gang
Installation method
ASL100-F1/2
1 gang  
86 box installation
ASL100-F2/4
2 gang
86 box installation
ASL100-F4/8
4 gang
86 box installation

 
 
 
 
Function description:
The smart panel supports KNX bus protocol. It is used to receive the signals triggered by button press. It
can realize on/off, dimming, scenario, curtain control, temperature adjustment, alarm functiosn through
the combination of short or long press and different parameter configuration.
 
7) Dry contact input module

Product model
Module width
Number of circuits
Installation method
ASL100-DI4/20
2
4
Standard guide rail installation

Function description:
 
The dry contact signal input module supports KNX bus protocol. It is used to receive external dry contact signal input. It can realize functions through different parameter configuration including on/off, dimming, scenario, curtain control, data transmission, count, temperature adjustment and alarm.